Cisco ASR 14000 Series Installation Manual page 88

How to Install or Remove an MSC
An MSC fits into any available MSC slot and connects directly to the midplane. If you install a new
MSC, you must first remove the MSC impedance carrier from the available slot.
Figure 4-25
Note The other version of the MSC, the ASR-MSC-B, is similar in appearance. The primary difference is the
ASR-MSC-B is a flat design, instead of modular.
Prerequisites
For information on MSC slot types, numbers, widths, and locations see
Note
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
4-36
Chapter 4
Modular Services Card (ASR-MSC)
Installing and Removing MSCs, PLIMs, and Associated Components
Chapter 1, "Overview."
OL-16973-01