Intrusion Detection [Disabled]; Administrator Password; System Firmware Update [Enabled] - Wincor Nixdorf M1 User Manual

Intrusion Detection [Disabled]

Intrusion is just possible when admin password is set, if the system cover is
removed and the Intrusion Detection is [Enabled].
The system stops during the next reboot or power up process and display
a warning message. After this warning the boot process stops and the user
has to power off and on the system and then enter the UEFI BIOS setup
which resets the open case detection automatically. Additionally is a view-
ing point of the case open switch below the enable/disable entry point
placed. This message will signalize the actual case open status directly.
Configuration Options: [Disabled] [Enabled]

Administrator Password

Set here the administrator password.

System Firmware Update [Enabled]

Changing the system firmware version is possible only if Enabled or
Restricted.
Enabled
Restricted
66
Windows Update (WU) and BIOS update tools can
change/update the system firmware version.
Only BIOS update tools can change/update the system
firmware version. Windows Update (WU) is blocked.
M1 and M2 Motherboard, User Manual