Flash Bracketing - Olympus E-620 Instruction Manual

I
Direct button
~ button
~
button
Flash bracketing
o
Notes
• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera's flash
intensity setting.
• When [(ffi+IB] is set to [ON], the flash intensity value will be added to the exposure
compensation value.
I@"
"(ffi+IB" (P. 102)
MENU
~
[q]
~
[1m]
Setting display
Viewfinder
I
Menu
I
Super control panel
"' T 1
Dr
(II
;:r
(II
;:r
o
o
e
j
co
•
The camera shoots multiple frames, changing the amount of light emitted by the flash for
each shot. The camera shoots 3 frames at a time with the follOWing amount of light: optimum
light, light adjusted in the - direction, and light adjusted in the + direction.
I
Menu MENU
~
[q]
~
[BRACKETING]
~
[FL BKT]
• The compensation value will change according to the EV
step.
~"EV
STEP" (P. 101)
• In single-frame shooting, the amount of light emitted by
the flash changes every time the shutter button is
pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops flash bracketing
shooting. When it stops,
m3]
blinks in the viewfinder
and
m3]
is displayed in green on the super control
panel.
18
EN