Program Shooting - Olympus E-620 Instruction Manual

Program shooting
II
The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Viewfinder
Program shift
I
[(0)
c'So F5.6
Ps [:,'] I;O-A
~
coo
Set the mode dial to
P.
• When the shutter button is half-pressed. the shutter speed
and aperture value are displayed on the viewfinder. Releasing
the shutter button displays the shutter speed and aperture
value on the super control panel screen.
Aperture value
Super control panel
Shooting mode
Program shift
(Ps)
By turning the control dial in the
P
mode, you can change
the combination of aperture and shutter speed while
maintaining the optimum exposure.
~
"Program line diagram (p mode)" (P. 131)
• The program shift setting will not be cancelled after
shooting. To cancel program shift setting, turn the control
dial until the shooting mode indication
Ps
on the viewfinder or super control panel changes
to
P
or turn off the power.
• Program shift is not available when you are using a flash.
!JJ TIPS:
The shutter speed and aperture value are blinking:
-----+
The optimum exposure cannot be obtained. For details, see "Exposure warning display"
(~P.
132).
•
m
><
"'C
o
(/l
c::
;
43
EN