Olympus E-620 Instruction Manual page 122

Hide thumbs Also See for E-620:
Table of Contents

Advertisement

Error codes
Viewfinder
indications
Normal
indication
Monitor
indication·
[I]
NO CARD
Possible cause
The card is not inserted, or
it cannot be·recognized.
Corrective action
Insert a card or insert a
different card.
,-
:'/'-
d
E
[I]
There is a problem with the
~
t."
card.
CARD ERROR
ca:-
d
:='
[I]
Writing to the card is
prohibited.
WRITE PROTECT
The card is full. No more
[I]
pictures can be taken or no
,- -'f
I
,-,
more information such as
!..
e,,-
e,
!..,
CARD FULL
print reservation can be
recorded.
[I]
There is no space in the
No indication
card and print reservation
or new images cannot be
CARD FULL
recorded.
Insert the card again. If the
problem persists, format the
card. If the card cannot be
formatted, it cannot be used.
The card has been set to read-
only setting with the computer.
Reset the card with the
computer.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
III
122
EN
No indication
No indication
No indication
No indication
CARD &£TUP
lID
elaa" the terminal of the
XO~Oth.
FORMAT
9ST01§KJ
,----
...
,
.1
NO PICTURE
ITJ
PICTURE ERROR
ITJ
THE IMAGE
CANNOT BE
EDITED
xD-Picture Cards cannot
be read or is not formatted.
There are no pictures on
the card.
The selected picture
cannot be displayed for
playback due to a problem
with this picture. Or the
picture cannot be used for
playback on this camera.
Pictures taken with another
camera cannot be edited
on this camera.
o
Select [xD CARD CLEAN],
press the
e
button and turn
off the camera. Remove the
card and wipe dry the
metallic surface with a soft,
dry cloth.
o
Select [FORMAT]
~
[yES],
and then press the
e
button
to format the card. Formatting
the card erases all data on
the card.
The card contains no pictures.
Record pictures and play back.
Use image processing software
to view the picture on a PC.
If that cannot be done, the
image file is damaged.
Use image processing software
to edit the picture.

Advertisement

Table of Contents
loading

Table of Contents