Flash Bracketing - Olympus E-620 Instruction Manual

Direct button
Super control panel
Menu
Setting display
5
x
Notes
• This does not work during manual flash.
• This does not work when the flash control mode on the electronic flash is set to MANUAL.
• If flash intensity is adjusted on the electronic flash, it will be combined with the camera's flash
intensity setting.
• When [w+F] is set to [ON], the flash intensity value will be added to the exposure
compensation value. g"w+F" (P. 102)

Flash bracketing

The camera shoots multiple frames, changing the amount of light emitted by the flash for
each shot. The camera shoots 3 frames at a time with the following amount of light: optimum
light, light adjusted in the – direction, and light adjusted in the + direction.
Menu
• The compensation value will change according to the EV step.
g"EV STEP" (P. 101)
• In single-frame shooting, the amount of light emitted by the
flash changes every time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until the
selected number of frames are taken.
• Releasing the shutter button stops flash bracketing shooting.
When it stops, 0 blinks in the viewfinder and 0 is
displayed in green on the super control panel.
78
EN
# + F j
i p: [w]
MENU [X] [w]
Viewfinder
MENU [X] [BRACKETING] [FL BKT]
F button
# button
RC MODE
BRACKETING
0 0
MULTIPLE EXPOSURE
8
BACK SET
BRACKETING FL BKT
OFF
AE BKT
3F 0.3EV
WB BKT
3F 0.7EV
FL BKT
3F 1.0EV
ISO BKT
BACK SET
j
0.0
+3
OFF
+2
+1
OFF 0
-1
ON
-2
-3