Using Live View; Activating Live View; Functions Available During Live View - Olympus E-620 Instruction Manual

Hide thumbs Also See for E-620:
Table of Contents

Advertisement

Activating live view
IIiD
It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white
balance effect and the subject's composition while you take a picture.
1
Press the
101
button.
• The mirror is raised and the subject is displayed on the LCD
monitor.
• When [AF MODE] was set to [C-AF], it will be set
automatically to [S-AF] (or [S-AF+MF] in case it was set to
[C-AF+MF]).
101
button
Functions available during live view
The following functions can be used during live view.
Focusing during live view
• Taking a picture after selecting the AF system
~P.
36
• Taking a picture using focus lock
~P.
37
• Taking a picture while adjusting the focus manually
~P.
39
• Taking a picture while focusing on a face
~P.
38
• Taking a picture while checking the focus by enlarging the zone to be focused
~P.
41
Taking a picture while checking the effect
• Taking a picture after comparing the effect of exposure compensation or white
balance
~P.
41
• Taking a panoramic picture
~P.
42
• Taking a picture while checking the effect of image stabilizer
~P.
64
Switching the indications on the
LCD
monitor
• Turning off the information display/Displaying the histogram or ruled lines
~
P. 40
• Checking the subject on the monitor even in low light situations
~P.
101
o
Notes
• If there is a high-intensity light source within the screen, the image may be displayed darker
but will be recorded normally.
• If the live view function is used over a long period, the temperature of the image pickup device
rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either
lower the ISO sensitivity or turn off the camera for some time.
• Exchanging the lens will cause live view to stop.
• The following functions are not available during live view.
C-AF/AE lock*/[AEUAFL]
* You can use AE lock when [LIVE VIEW AF MODE] is set to [IMAGER AF].
• When [IMAGER AF] is selected, you cannot use the AF illuminator.
35
EN

Advertisement

Table of Contents
loading

Table of Contents