Playback Functions; Single-Frame/Close-Up Playback - Olympus E-620 Instruction Manual

Single-frame/Close-up playback
l§]
l1
lEI
button
Press
8:0
to change the
close-up position.
Press the INFO button
+
(Close-up frame-by-frame playback)
Press
ee
to view frame-by-
frame close-ups.
When
[8
FACE DETECT]
is set to [ON], press
@:>@)
to move to another face in
close-up position.
Press the INFO button to
return to close-up
playback.
Press the INFO button
+
(Close-up position playback)
Press
0:0
to move the display
of the close-up position.
When
[8
FACE DETECT]
(I&'P. 39) is set to [ON], a
frame is displayed around a
detected face. Press
e
to
move the frame to another
face.
Press the
Fn
button
• Plays back the image at a
10x magnified close-up
position.
@:> :
Displays the frame that is
stored 10 frames back
@) :
Displays the frame that is
stored 10 frames ahead
e :
Displays the next frame
e :
Displays the previous frame
(/
,f
~~/'J'\'-~==-'--'-''-'
(Single-frame playback) (Close-up playback)
• To exit the playback mode, press the
lEI
button again.
• Pressing the shutter button halfway
resumes the shooting mode.
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. IJ@f"REC VIEW" (P. 93)
1
Press the
[E
button (Single-frame playback).
Fn
button
• The last recorded image appears. INFO button
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn
on the camera again.
2
Use
(,0
to select images you want to view. You can
also turn the control dial to switch to
a.
for close-
up playback.
•
82
EN