Table of Contents
Advertisement
4
Exposure
Program shooting
The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Set the mode dial to P.
• When the shutter button is half-pressed, the shutter speed
and aperture value are displayed on the viewfinder. Releasing
the shutter button displays the shutter speed and aperture
value on the super control panel screen.
2008. 08.16
Normal
Super Control panel
Program shift (%)
By turning the control dial in the P mode, you can change the combination of
aperture and shutter speed while maintaining the optimum exposure.
g"Program line diagram (P mode)" (P. 125)
• The program shift setting will not be canceled after shooting. To cancel
program shift setting, turn the control dial until the shooting mode indication
% on the viewfinder or super control panel changes to P or turn off the
power.
• Program shift is not available when you are using a flash.
TIPS
The shutter speed and aperture value are blinking:
j The optimum exposure cannot be obtained. For details, see "Exposure warning
display" (gP. 125).
Aperture value
250
F5.6
Shutter speed
AF
OFF
arge
Shooting mode
AF confirmation mark
Viewfinder
Program shift
4
43
EN
Advertisement
Table of Contents
