Related Manuals for DAPAudio CA-4150
Summary of Contents for DAPAudio CA-4150
- Page 1 MANUAL ENGLISH CA-4150 Ordercode: D4512 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
CA-4150 Table of contents Warning ................................... 2 Safety Instructions ..............................2 Operating Determinations ............................4 Return Procedure ..............................4 Claims ..................................4 Description of the device ............................. 5 Frontside ..................................5 Backside ..................................6 ... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: DAP Audio CA-4150 Schuko power cable (1,5 m) ... - Page 4 CA-4150 Avoid ground loops! Always be sure to connect the power amps and the mixing console to the same electrical circuit to ensure the same phase! Before changing the ground, always turn off your amplifier. Connecting amplifier outputs to oscilloscopes or other test equipment, while the amplifier is in bridge mode, may damage both, the amplifier and test equipment.
-
Page 5: Operating Determinations
CA-4150 Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way than the one described in this manual, the product may suffer damages and the warranty becomes void. -
Page 6: Description Of The Device
CA-4150 Description of the device The CA series is a family of powerful amplifiers which guarantee high output level. There are 4 available versions: CA-2150, CA-2300, CA-3150 and CA-4150. Features Output Power Stereo 2Ohm: 4 x 230W RMS ... -
Page 7: Backside
CA-4150 Power Switch ON/OFF Flick the switch to turn the device on/off. Power LED The LED will light in blue when the CA is switched on. PROT, CLIP, SIGNAL LEDs PROT: The LED will light in red when the amplifier is in protection mode. Switch off the device and find out what the problem is. -
Page 8: Installation
CA-4150 Installation Remove all packing materials from the CA-4150. Check if all foam and plastic padding is removed. Fit the equipment to a 19" rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. -
Page 9: Connection Examples
CA-4150 Connection Examples Mode 1 – Ch A/B/C/D – ALL STEREO Fig. 04 Mode 2 – Ch A/B/C/D – ALL PARALLEL Fig. 05 Ordercode: D4512... -
Page 10: Mode 3 - Ch A/B - Bridged, Ch C/D - Bridged
CA-4150 Mode 3 – Ch A/B – BRIDGED, Ch C/D – BRIDGED Fig. 06 Mode 5 – Ch A/B – STEREO, Ch C/D – BRIDGED (FULL RANGE) Fig. 07 Ordercode: D4512... -
Page 11: Mode 6 - Ch A/B - Parallel, Ch C/D - Bridged (Full Range)
CA-4150 Mode 6 – Ch A/B – PARALLEL, Ch C/D – BRIDGED (FULL RANGE) Fig. 08 Mode 8 – Ch A/B – STEREO, SUB (Ch C/D – BRIDGED, INPUT= Ch A+B) Fig. 09 Ordercode: D4512... -
Page 12: Maintenance
CA-4150 Maintenance The CA-4150 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. -
Page 13: Product Specifications
CA-4150 Product Specifications Output Power Stereo 2Ohm: 4 x 230W RMS Stereo 4Ohm: 4 x 150W RMS Stereo 8Ohm: 4 x 90W RMS Bridge 2Ohm: Not allowed Bridge 4Ohm: 2 x 275W RMS Bridge 8Ohm: 2 x 190W RMS ... -
Page 14: Notes
CA-4150 Notes Ordercode: D4512... - Page 15 CA-4150 Ordercode: D4512...
- Page 16 ©2017 DAP Audio...