Table of Contents
Advertisement
2 / INSTALLATION
BEFORE ELECTRICAL CONNECTION
Warning
Warning
Warning
Warning
: Ensure that your appliance has not suffered any
damage during transport (deformed seal or door, etc...). If you see any
kind of damage, before doing anything else, contact your retailer.
If the power cable is damaged, it should be replaced by the manufacturer, its
after-sales service department or by a qualified person to avoid danger.
Ensure that:
- The electrical installation has sufficient voltage.
- The electrical wires are in good condition.
- The diameter of the wires complies with the installation requirements.
- Your electrical installation is equipped with 10-ampere thermal-sensitive
protection.
In case of doubt, consult your electrician installer.
Important
Important
Important
Important
it must remain accessible after installation of the appliance. The oven's
neutral conductor (blue wire) must be connected to the network's
neutral conductor. In your electrical installation, allow for a user-
accessible device that must be able to separate the appliance from the
main power supply and whose contact opening is at least 3 mm above
all the terminals.
:
In the case of connections with an electric receptacle,
10
EN
Advertisement
Table of Contents
