Multi-Sequence Cooking; Child Lock - Brandt ME1510X User's Manual & Installation Instructions

MULTI-SEQUENCE COOKING

The appliance allows programming two consecutively executed cooking sequences, e.g.
a defrosting process followed by microwave cooking. The AutoCook function cannot be
integrated into a multi-sequence.
Example : To set a multi-sequence of 5 min defrosting followed by 7 min microwave
cooking at 80% power,
• Press the Defrost by time key twice
• The display shows dEF2.
• Set the required defrosting time (example : 5 min) with the Data knob.
• Press the Microwave power key.
• Set the microwave power with the Data knob to the required level (example: 80%,
P80)
• Press the Start key to confirm the selected power.
• Set the required cooking time with the Data knob (example: 7 minutes)
• Press the Start key. The multi-sequence starts, the remaining time of each
sequence counts down in the display.
At the end of the first sequence, an acoustic signal informs you that the second
sequence starts.
CHILD LOCK (LOCKING THE CONTROL ELEMENTS)
The appliance allows locking the control elements to avoid its unauthorized use.
To access this function, the display must be in « daytime » mode.
• Press the Stop / Clear key for 3 sec.
• An acoustic signal and the lock symbol in the display inform you that the access to
the control elements is locked.
To cancel the child lock function, proceed in the same way:
• Press the Stop / Clear key for 3 sec.
• An acoustic signal and the extinguished lock symbol in the display inform you that
the access to the control elements is available again.
21