B) Electrical Connection - Brandt GE2805 Instruction Manual

INSTALLATION ON A COUNTERTOP
Select a level surface that provides enough open space for the intake and/or outlet vents (no
built in).
The microwave oven must be placed on a surface located at least 34 inches (85 cm) above
the ground.
The back of the appliance should be placed against a wall.
(1) Leave a minimum space of 12 inches (30cm) above the oven.
(2) Do not remove the legs from the bottom of the oven.
(3) Blocking the air intake and/or air outlet grille openings can damage the oven. The left
side must be open.
(4) Place your appliance as far as possible from your televisions or radios. Microwave
oven can interfere with your others appliances.
Electrical Connection
b)
Ensure that:
- The electrical installation has efficient voltage.
- The electrical wires are in good condition.
- The diameter of the wires complies with the installation requirements.
- Your electrical installation is equipped with 20-ampere thermal-sensitive protection.
In case of doubt, consult your electrician installer.
The electrical connections are made before the appliance is installed in its housing.
Electrical safety must be provided by a correct build-in. During installations and maintenance
operations, the appliance must be unplugged from the electrical grid.
The power plug or any other power cut device must stay immediately accessible for an
emergency stop.
If the oven presents any anomaly, unplug the appliance or disconnect the connexion to the
sector.
If the plug cord is damaged, it must be replaced by the manufacturer, its after-sale service,
or a similar qualified person to avoid any danger.
Warning: We cannot be held responsible for any accident resulting from an inexistent,
defective or incorrect ground lead.
25