Table of Contents
Advertisement
2 / INSTALLATION
ELECTRICAL CONNECTION
Important
Important
Important
Important
in. During installation and maintenance operations, the appliance must
be unplugged from the electrical grid; fuses must be cut off or
removed..
The electrical connections are made before the appliance is installed in its
housing.
The oven must be connected with a power cable (standardized) with three
1.5 mm 2 conductors
must be connected to a monophase 220-240 V network via an IEC 60083
standardized receptacle (1 ph + 1 N + ground lead) or in accordance with
installation rules. The safety wire (green-yellow) is connected to the
appliance's terminal and must be connected to the ground lead of the
electrical set-up.
Do not use your appliance immediately (wait approximately 1 to 2 hours)
after having moved from a cold location to a hot location because the
condensation may cause a malfunction.
Important
resulting from an inexistent, defective or incorrect ground lead.
:
Electrical safety must be provided by a correct build-
H05RN-F 3G de 1 mm²
: We cannot be held responsible for any accident
(1 ph + 1 N + ground) that
11
EN
Advertisement
Table of Contents
