GB IE I N S TA L L AT I O N & U S E R I N S T R U C T I O N S Section Contents Page No. Section Contents Page No. Important Notes Preparing the Appliance Installation Requirements Fixing the Appliance Appliance Data...
GB IE 6.0 SITE REQUIREMENTS - CONTINUED wall coverings which are sensitive to even small amounts of heat should be avoided, as some discolouration may occur. It should be noted that the appliance creates warm convected air currents. These currents move heat from the room surround- ings to, and up the wall surfaces adjacent to the heater.
GB IE 8.0 PREPARING THE APPLIANCE - CONTINUED 2. Now remove the 2 x No 8 Pozi self tapping screws, retaining the lower lamp cover plate, as shown in Fig 2, and remove the cover plate. No 8 fixing screws Lamp cover plate Fig 2...
GB IE 10.0 OPERATING THE FIRE READ ALL INSTRUCTIONS BEFORE USE! Check that the heater outlet grille, mounted at the top of the appliance, is not covered or obstructed in any way, and ensure the power to the fire is switched on. The appliance is controlled using four switches mounted at the right hand side towards the top. •...
Page 6
GB IE 13.0 CLEANING ALWAYS DISCONNECT THE APPLIANCE FROM THE MAINS SUPPLY OUTLET SOCKET BEFORE UNDERTAKING ANY MAINTENANCE! There are no specific requirements for care, other than regular cleaning of the general appliance. A wipe with a dry cloth is nor- mally sufficient.