Samsung NX58H9500WS/AA Service Manual page 78

One cooktop
burner will
not light.
Check whether the burner head and
cap is properly assembled.
Ok
Check the spark from the electrode
when it its turned to LITE.
Ok
Check crack of the Electrode.
Ok
Check the ventilation of the electricity
at the housing terminal of Ignition
switch, in case of turning the knob
to LITE
Ok
*Check for a dirty surface of
the burner orifice .
Ok
*Check for a crimped of broken
gas pipe .
END
No
*Assemble the burner head and
cap on the right position.
No
*Check the voltage of the Spark
module connector.[120V]
No
*Change the Electrode.
No
*Change the Ignition switch.
No
*Clean the surface of burner
orifice or replace the orifice.
No
*Replace the damaged gas pipe.
78
END
*Replace the Spark
module.
END
END
END
END
END