Burner Broil - Samsung NX58H9500WS/AA Service Manual

3-23 BURNER BROIL

WARNING
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
the range. Replace all panels before operating range. Failure to do so can result in death or personal
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
1. Follow the step on 3-1.
2. Open the oven door and remove
the racks from inside the oven.
3. Disconnect the wires or the
connector of the HSI.
and mark the two wires going to
4. Remove 1 screw of bracket HSI-
wire.
5. Remove 4 screws on bracket-
broil spreader to top of oven.
6. Support the burner-broil with
BURNER
one hand, remove 2 screw
BROIL
supporting the burner-broil to the
front and the rear of the oven.
7. Pull the upper ASSY-BURNER
BROIL SPREADER to
disconnect it from the holder
nozzle-broil on the rear wall of
the oven.
8. Carefully remove ASSY-
BURNER BROIL SPREADER.
9. Separate the burner broil and
bracket-broil spreader.
10. Replace the Burner Broil.
Explanation Explanation Photo
Connector
6
6
Burner Broil
49
Bracket HSI
Wire
4
5
5
5
5
Flame Guide
Bracket Broil
Spreader