Table of Contents
Advertisement
Gill Instruments Ltd
_____________________________________________________________________________________________________________
The logged Wind Data .txt file can be imported into Microsoft Excel if it is required to
manipulate the data or graph plot the data.
10. MAINTENANCE & FAULT-FINDING
10.1. Cleaning and Handling
When installing the unit handle with lint free gloves and degrease the unit to reduce the
build-up of deposits.
If there is any build-up of deposit on the unit, it should be gently cleaned with a cloth,
moistened with soft detergent. Solvents should not be used, and care should be taken to
avoid scratching any surfaces. The unit must be allowed to defrost naturally after being
exposed to snow or icy conditions, do NOT attempt to remove ice or snow with a tool.
________________________________________________________________________________________________
WindObserver 65
Page 57
Issue 4
Doc. No. 1390-PS-0039
June 2016
Advertisement
Table of Contents
