Table of Contents
Advertisement
5. Place a hard drive in the drive tray (see Figure 6-15).
6. Secure the hard drive to the tray using four screws.
Figure 6-15. Removing a Dummy Drive Tray
Drive Tray
7. Insert the hard drive into the chassis. To do this:
a. Press the hard drive release button to extend the drive tray handle.
b. Insert the hard drive into the chassis and close the handle to lock the hard
drive into place (see Figure 6-16).
Figure 6-16. Installing a Hard Drive
6-15
Chapter 6: Advanced Chassis Setup
SAS/SATA
Hard Drive
Advertisement
Table of Contents
