Sundance Spas Kingston 980 Series Owner's Manual page 36

980™ Series
Follow these steps to register your spa.
1. Using your home computer or other device, connect to the internet.
2. Go to www.SundanceSpas.com website to register your spa.
3. Click Owner
4. Click Warranty Registration
5. Enter your serial number.
6. Click Next to continue to complete your registration.
7. Once registered you will be given a passcode that will need to be
entered into the control panel.
Keep a record of your serial number and passcode for any future
reference. Write that information below.
Serial Number:
Passcode:
Once you register your spa online, you can then enter the registration
information into the control panel.
Note: If a number is entered wrong you can tap
1. From the registration screen, Figure 10.2a,
tap
enter #
2. Input the 9-digit serial number, Figure 10.2c. Use the letters A, D or
R if your serial number begins with a letter.
3. Tap to enter and save the information. Then proceed to enter the
passcode.
4. Now input the 9-digit passcode, Figure 10.2d, that was provided
online when you registered your spa.
5. Tap to enter and save the information.
6:45
ENTER SPA SERIAL #
9 8 7 6 5 4 3 2 1
1 2 3 A
4 5 6 D
7 8 9 R
0
Figure 10.2c
Page 30
to enter the spa serial number.
6:45
ENTER PASSCODE #
9 8 7 6 5 4 3 2 1
1 2 3
4 5 6
7 8 9
0
Figure 10.2d
A
D
R
to move backwards.