Advertisement
Items you provide
Step 3: Installing the appliance on a tabletop
Note: If you have ordered a SCSI adapter with your appliance, refer to the
IBM TotalStorage NAS 100 Hardware Installation and Service Guide for
instructions on installing the adapter in your appliance.
1. Place the appliance on a level and stable surface.
2. Facing the front of the chassis, install the first mounting bracket:
2
NAS 100 Quick Start Instructions
v One set of documentation including: Caution: Safety
Information – Read This First, IBM TotalStorage NAS 100
Hardware Installation and Service Guide, Quick Start
Instructions and product and documentation CDs.
v Four mounting brackets
v One Cat 5+ copper cable with connection instructions.
v One PC with a subnetwork connection, Windows
Windows 2000, or Windows NT
Internet Explorer 5.1 or later. The PC is used to establish
a remote connection to the appliance for the purpose of
configuring it.
®
®
4.0 or later and
98,
Advertisement
