Advertisement
Note: Two situations can prevent your DHCP system from finding the host
name:
v The DHCP server is on a different subnetwork than the appliance
v The DNS server has appended a suffix, such as .com to the host
name
If this happens, use the static IP address.
2. Log on to the web GUI using the following ID and password:
v User ID: Administrator
v Password: password
3. The Easy Setup window appears. Easy Setup allows you to perform the
following basic configuration tasks:
v Configuration of the administration ID and password
v Configuration of the host name
v Creation of a single share
v Configuration of the ports.
If the Easy Setup basic configuration does not meet your network needs,
you can use other configuration tools, or you can link to Terminal Services
by clicking the Maintenance tab and following the prompts.
6
NAS 100 Quick Start Instructions
Advertisement
