Introduction; Operating The Jablotron 100 System - jablotron 100 User Manual

2 2

1. INTRODUCTION

Thank you for choosing the JABLOTRON 100 security system. This system
is a unique fl exible indoor solution for commercial and home security that offers
the use of both wired and wireless devices. The JABLOTRON 100 is very easy
to control. Simplicity of control consists of two steps, authorization with a code
or a RFID tag followed by pressing an individual keypad segments with assigned
function on a keypad. It's possible to use a reversed method when the "Default"
system profi le is enabled. Press a segment button fi rst and then authorize.
The control segments use a simple traffi c light logic which everyone can
understand. The number of segments can be fl exibly adapted to requirements
of premises. The JABLOTRON 100 offers a wide range of detectors with
timeless design and can be operated from anywhere owing to complete remote
control access. The J-Link program, the MyJABLOTRON web interface and
the MyJABLOTRON application for smart phones allow you to control,
program and monitor the system remotely.
The JABLOTRON 100 is designed for up to 300 users and it can be divided
into 15 separate sections. Up to 120 detectors can be connected and
the system offers up to 32 multi-purpose programmable outputs
(e.g. home automation).

2. OPERATING THE JABLOTRON 100 SYSTEM

The security system can be controlled in a number of different ways. To unset the alarm, authorization
in the form of user identifi cation is always required. The system detects the identity of the users and allows
them to operate those parts of the system which they have been assigned to control. You can choose from
different ways of setting with or without authorization. When Standard authorization type is used, you don't
have to authorize yourself because it's possible to set the system just by pressing the right segment button
on a keypad. The user name, date, and time are recorded and stored in the system's memory every time
the system is accessed. This information is available indefi nitely. Any user can also cancel an alarm sound
just by authorization in any part of the system (depending on their access rights). However, that does not
automatically unset the system (unless the system's default setting is changed).
Note: Depending on the confi guration of the installation and system settings, some of the options descri-
bed below may not be available. Consult the confi guration of the installation with your service technician.
Users and Their Access Rights
CODE
AUTHORIZATION
ARC code
Service code
(Service)
TYPE DESCRIPTION
This code has the highest level of authorization to confi gure the system's behaviour and is exclusively
allowed to perform the system unblock after a triggered alarm. It can enter Service mode, access all tabs
with options including ARC communication to which it can deny access to a Service technician
(Service code). As long as the "Administrator-restricted Service/ARC right" parameter remains unchecked,
the ARC code can control all sections and PG outputs used in the system. This code enables to add more
Administrators and other users with a lower level of authorization assign them with codes, RFID tags
and cards. It also has a permission to erase alarm and tamper alarm memory.
The number of ARC codes is limited only by remaining capacity of the control panel.
It can enter Service mode and confi gure the system's behaviour. It has access to all tabs with
options including ARC communication unless the access is limited by the ARC technician. As long as
the "Administrator-restricted Service/ARC right" parameter remains unchecked, the Service code can
control all sections and PG outputs used in the system. It can create a user with ARC permission, other
Service technicians, Administrators and other users with a lower level of authorization and assign them
with access codes, RFID tags and cards. The number of Service codes is limited only by remaining
capacity of the control panel.
By the factory defaults, the code is 0*1010 and it can't be erased.