Chapter 11: Quality of Service
Configuring a Class Map
Select Configure Class from the Step list.
2.
Select Show from the Action list.
3.
Figure 11-2: Showing Class Maps
To edit the rules for a class map:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
Select Add Rule from the Action list.
3.
Select the name of a class map.
4.
Specify type of traffic for this class based on an access list, a DSCP or
5.
IP Precedence value, a VLAN, or a CoS value. You can specify up to 16
items to match when assigning ingress traffic to a class map.
Click Apply.
6.
Figure 11-3: Adding Rules to a Class Map
To show the rules for a class map:
Click Traffic, DiffServ.
1.
Select Configure Class from the Step list.
2.
– 242 –