Functions - Clearaudio Double Matrix Professional Sonic User Manual

5. Functions

5.1 Automatic cleaning
• Automatic / Superclean / Eco mode
The "Auto" button has a multifunction. Pressing it once gives "Automatic mode". Pressing it twice in
quick succession starts the "Superclean mode", indicated by slow flashing of the blue LED ring that
surrounds the button. The third program is the ECO mode. If you hold the button "Auto" for three
seconds, you will start this program (indicated through the fast flashing ring of the button "Auto").
If the respective cleaning program (Auto mode / Super Clean / ECO mode) is finished, the blue ring
of the button will flash short and constant. You can cancel every automatic mode by pressing the
button "Power" shortly.
5.2 Manual cleaning
• Power
Starts the platter rotating and switches on the sonic cleaning function.
• Liquid
Press to apply cleaning fluid to the upper and lower sides of the record.
• Platter
Press to change the platter's rotational direction.
• Platter Speed
Turn to adjust the platter rotation speed.
• Vacuum
Activates the suction drying process while also stopping the sonic cleaning function.
5.3 Automatic and manual cleaning
• Antistatic brush
The antistatic brush arm is used to discharge any static that
is generated during the drying process.
After completion of the automatic programs or manual
cleaning, the dry record should pass the antistatic brush at
least for 2-3 full rotations. Turn the antistatic arm above the
record to the outer point. The record will start to turn and
the constructed static will derived.
The antistatic function can only be activated with opened
suction arm.
After 2-3 full rotations, turn the antistatic arm back to the start position. The rotation of the record ends
automatically.
• LED level indicator
Shows the level of cleaning fluid currently in the reservoir (0% to 100%).
Page / Seite 8
Double Matrix Professional Sonic
Bedienungsanleitung
Pic. 3: Turning the antistaic unit
© clearaudio electronic GmbH 2017
User manaul