Service - Clearaudio Double Matrix Professional Sonic User Manual

Auto protect:
If the cleaning and vacuum assembly is open (Fig. 2, No. 13, page 7), all functions of the buttons are
deactivated. The antistatic arm can still cause the rotation of the platter axis when turned to the middle.
Please note:
If you won't be using the Double Matrix Professional Sonic for more than a week, we suggest that you
drain the remaining fluid from the cleaning fluid reservoir. For this pull both hoses from the vaccuum unit,
and passthem in a bowl (etc.) and press the bottom „Liquid".
Important:
After use, the Double Matrix Professional Sonic should always turned off by pressing the
switch on the IEC socket to the position "0".
If you won't be using the unit for more than a week, we recommend to unplug the cleaning
machine.

9. Service

The standard warranty period for the
By returning your completed warranty card to Clearaudio within two weeks of purchase, you can benefit
from an extended warranty period of three (3) years.
Double Matrix Professional Sonic
The
period, otherwise the warranty will expire.
Regular visual inspection of a possibly defective insulation of the cable is also advisable for your own safety.
A damaged mains lead should be replaced immediately by an expert.
Servicing for all Clearaudio products must be done via your dealer.
To transport the Clearaudio
sure to pack the unit exactly as it was delivered, by following the reverse of the procedure described in
Double Matrix Professional Sonic
setup of the
Disclaimer
Clearaudio assumes no liability for damage caused to records resulting from incorrect product handling.
Page / Seite 12
Double Matrix Professional Sonic
Double Matrix Professional Sonic
should only be repaired by the manufacturer during the warranty
Double Matrix Professional Sonic
.
is two (2) years.
, always use the original packaging and be
© clearaudio electronic GmbH 2017
User manaul
Bedienungsanleitung