Epson DS-780N User Manual page 39

User's Guide
3. Load the laminated cards into the input tray facing down with the top edge facing into the ADF.
Slide the laminated cards into the ADF until they meet resistance.
4. Slide the edge guides to fit the edge of the laminated cards.
Note:
❏ To scan laminated cards, select Scan laminated card on the Settings window on the Main Settings tab in Epson
Scan 2 to increase the accuracy of auto size detection. See the Epson Scan 2 help for details.
❏ To scan laminated cards, select Off in Detect Double Feed on the Main Settings tab in Epson Scan 2. See the Epson
Scan 2 help for details.
If you forget to disable Detect Double Feed in Epson Scan 2 and a double feed error occurs, remove the card from
the ADF and then reload it, tap DFDS Function on the control panel's screen to set it to On which disables Detect
Double Feed for the next scan, and then scan again. The DFDS Function (Double Feed Detection Skip function)
only disables Detect Double Feed for one sheet.
Related Information
"Required Settings for Special Originals in Epson Scan 2" on page 61
&
Specifications of Originals and Placing Originals
39