Creating Scanned Images To Suit Your Needs; Image Adjustment Features - Epson DS-780N User Manual

User's Guide
The Automatic Feeding Mode window is displayed on your computer.
5. Adjust the edge guides, and then place the original in the ADF.
Scanning starts automatically.
6. After scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
❏ If you want to scan originals that are detected as double feeds, for example plastic cards or envelopes, tap DFDS
Function on the control panel before placing the original to skip double feed detection.
❏ If you want to scan originals that are likely to jam, for example thin paper, tap Slow on the control panel before
placing the original to slow down the scanning speed.
7. After you have scanned all originals, close Automatic Feeding Mode.
Tap Save and Finish on the control panel or press Finish on the Automatic Feeding Mode window displayed
on your computer.
Note:
You can make timeout settings to finish Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (minutes) on the window.
The scanned image is saved to the folder you specified.
Related Information
"Placing Originals" on page 28
&

Creating Scanned Images to Suit Your Needs

Image Adjustment Features

You can adjust scanned images using the features on the Advanced Settings tab in Epson Scan 2.
Except for a few features, you can check the adjustment results in the preview window.
Advanced Scanning
75