User's Guide
Basic Scanning
Scanning Using the Control Panel
You can scan the original from the control panel, using the jobs created in Document Capture Pro (Windows)/
Document Capture (Mac OS)/Document Capture Pro Server (Windows Server).
Set the operation mode on the control panel before scanning.
Note:
Document Capture Pro does not support Windows Vista/Windows XP.
Setting Operation Mode
Before scanning, set the operation mode on the control panel to match the computer on which Document Capture
Pro/Document Capture/Document Capture Pro Server is installed.
1. Select Settings from the home screen.
2. Select Document Capture Pro.
3. Check the settings. If you want to change the settings, tap Change Settings and follow the on-screen
instructions.
❏ Operation Mode:
Select Client Mode if you are using the computer on which Document Capture Pro (Windows) or
Document Capture (Mac OS) is installed.
Select Server Mode if you are using the server on which Document Capture Pro Server (Windows Server)
is installed. You need to set the server address when you select Server Mode.
❏ Group Settings: Enable this when using the scanner in a group. If you enable group settings, you can only
find computers that are in the same group. This feature can only be applied when using the scanner over a
network.
❏ Group: Set the group number when you enable Group Settings.
For Document Capture Pro/Document Capture, you can set groups in Option > Network Scanning
Settings. The Option menu is displayed only in standard view mode when you are using Document
Capture Pro.
4. When you have finished checking, tap Close.
Scanning Using Jobs from the Control Panel
Note:
❏ Before scanning, install Document Capture Pro/Document Capture/Document Capture Pro Server on your computer
(server) and create the job. A preset job is available that allows you to save scanned images as a PDF.
❏ When using the scanner over a network, connect the scanner and the computer (server) to the network.
❏ When using the scanner with a USB cable, make sure that the scanner and the computer are connected correctly.
❏ Before scanning, set the operation mode on the control panel.
Basic Scanning
54