Plastic Cards - Epson DS-780N User Manual

User's Guide
Note:
❏ You can scan long paper up to 5,461 mm (215 inches) in length with a resolution of 300 dpi or less, and over 5,461
mm (215 inches) to 6,096 mm (240 inches) with a resolution of 200 dpi or less.
❏ You need to specify the paper size in Epson Scan 2. There are three ways to specify the paper size in Epson Scan 2, if
the paper length is 3,048 mm (120 inches) or less, you can select Auto Detect (Long Paper) to detect the size
automatically.
If the paper length is more than 3,048 mm (120 inches), you need to select Customize and enter the size of the paper.
If the paper length is 5,461 mm (215 inches) or less, you can use Detect paper length instead of entering the paper
height. If the paper is longer than 5,461 mm (215 inches), you need to enter the width and height of the paper.
❏ Support long paper at the input side so that it does not drop out of the ADF, and on the output side so that the
ejected paper does not fall from the output tray.
Related Information
"Required Settings for Special Originals in Epson Scan 2" on page 61
&

Plastic Cards

Specifications of Plastic Cards
The specification of plastic card you can load into the scanner.
Size Card Type
ISO7810 ID-1 Type With embossing
54.0×85.6 mm
Without embossing
(2.1×3.3 in.)
Specifications of Originals and Placing Originals
Thickness
1.24 mm (0.05 in.) or
less
0.76 mm (0.03 in.) or
less
34
Loading Capacity Loading Direction
1 card Horizontal (Landscape)
5 cards