Riello ricloud Quick Start Manual page 16

Icona Descrizione
Icon Description
Reading SENSORS/BOILER SETTINGS (when OT-
Bus connection available between WiFi Box
InFO
EN
and the boiler and if the OT-Bus allow it). Press
again the PROG (2) to enter on lower menu
and proceed to read the values available.
IT
Sottomenu
Lower menu
They are shown in sequence the followings
info (if value not available "- -" is shown):
tSEt = set-point flow temperature calculated
by the thermostat.
tFLO = reading of the boiler flow sensor tem-
perature.
trEt = reading of the boiler return sensor
temperature.
tdH = reading of the boiler DHW sensor tem-
perature.
tFLU = reading of the boiler flues sensor tem-
perature.
tESt = reading of the boiler outdoor sensor
temperature (fitted to the boiler or communi-
cated by the web).
MOdU = instantaneous percentage of modula-
tion of boiler fan.
FLOr = instantaneous domestic hot water flow
rate.
HOUr = hours worked in high condensation
mode.
PrES = central heating system pressure.
tFL2 = reading of the heating flow sensor on
second circuit
16
EN