Symbols - Fluke 8508A User Manual

8508A
Users Manual

Symbols

The following safety and electrical symbols may be used on the Multimeter or in this
manual.



or




CAT II
CAT III
CAT IV


1-10
Risk of danger. Important
information. See manual.
Hazardous voltage. Voltage
>30 V dc or ac peak might be
present.
AC or DC (Alternating or Direct
Current)
Digital signal.
Earth ground.
Recycle.
Measurement Category II is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the source
of the building's low-voltage MAINS installation.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to
Fluke's website for recycling information.
Product conforms with the requirements of the applicable EC directives.

AC (Alternating Current).

DC (Direct Current).

Potentially hazardous voltage.

Power ON / OFF

Fuse.

Double insulated.