Syntax Diagrams Of Major 8508A Functions - Fluke 8508A User Manual

8508A
Users Manual
• Device-Dependent Error - a reportable internal operating fault has been detected.
• Query Error - the controller is following an inappropriate message exchange
• Request Control - provided for devices which are able to assume the role of
• Operation Complete - initiated by a message from the controller, indicates that the
Measurement events
The following events are flagged in another 8-bit latched register, called the
Measurement Event Status Register (MESR), read-accessible to the controller.
• A measurement has been completed from an initiating trigger.
• When the instrument has been commanded to store a number of measurements in a
• Mathematical Overflow
• Overload
• Low Limit Reached
• High Limit Reached
• New Minimum Value Established
• New Maximum Value Established

Syntax Diagrams of Major 8508A Functions

DC Voltage
The following commands are used to select the
4-10
protocol, in attempting to read data from the output queue.
controller. This capability is not available in the 8508A.
8508A has completed all selected pending operations.
block, and the specified number of measurements in the block has been stored.
DCV
function and set its configuration.
DCV
,
Nrf
phs
A UTO
FILT_ON
FILT_OFF
RESL5
RESL6
RESL7
RESL8
FA ST_ON
FA ST_OFF
TWO_WR
FOUR_WR
DC Voltage
adj209f.eps