Away; Feels Like; Fan; Heat & Cool - Lennox iComfort E30 User Manual

AWAY

Away (Smart Away) is a feature that can be enabled once you have created and
registered your account. Both Home Info and Account menu options must be
completed before this option can be enabled. Once enabled, you can set the low
and high temperature settings when smart away determines that no one is home.
The Smart Away feature depends on the Lennox iComfort Thermostat App running
on your mobile device (smart phone or tablet).
NOTE: When Away is selected on the home screen, Smart Away is disabled until
Away is canceled from the home screen.
Smart Away can also be enabled from your mobile device, once you have installed
the Lennox iComfort Thermostat App and logged in. Go to the menu > settings >
away and turn ON smart away. To allow the mobile device you are on to use this
feature, turn ON participate. The away fence option will appear and by default,
the setting is for one mile. The range for this setting is 1/4 to 4 miles (0.40 to 6.43
kilometers).
It is also recommended to enable location services on your mobile device to
enhance the location accuracy when traveling away from home. Consult your
mobile device user guide for instructions.
55°
smart away
Use the iComfort app to control the temperatures in your home while you are away
reset smart away
Turn participate off in all mobile devices (there are currently 2 mobile devices participating)
away set−points
55°
min
Please make sure to install the iComfort S30 mobile App to participate in Smart Away.
You can also configure the away fence in the mobile App.
There are currently 2 mobile devices participating.
Figure 10. Smart Away Screen

FEELS LIKE

The feels like feature uses a combination of outdoor temperature and indoor
humidity to come up with the feels like comfort level in the home.
NOTE: Feels Like is not a temperature setting but the temperature that the space
feels like based on current outdoor temperature and indoor humidity. To
adjust Feels Like, lower indoor temperature, or both indoor temperature
and humidity percentage settings.
NOTE: When Feels Like is set to on, the words Feels Like will appear above the
indoor temperature display on the home screen.
away
on
85°
feels like
Display and control your system using feels like temperatures instead of actual temperatures
outdoor
temperature
+
Feels like temperatures factor in the outdoor temperature
and indoor humidity for more accurate control of the temperatures in your home
Figure 11. Feels Like Screen

FAN

Go to menu > settings > fan to turn on or off Allergen Defender. Fan mode options
for circulate can be adjusted on this screen as well. Adjustments between 9 to 27
minutes on how long the air will circulated each hour. The circulate option runs
during any mode selected except when the system is turned off.
Allergen Defender: When Internet weather is enabled and pollen count is high in
the home's zip code, the fan will run between heating or cooling systems to help
clean the air.
HEAT & COOL
This screen allows changes to how the system operates. Options are single set-
point, heat pump mode (normal or comfort), auxiliary heat and safety protection.
1. Perfect Temp: Option will only be available in non-zoning systems. This option
allows the user to control both heating and cooling temperatures with one
single temperature setting. Factory default is off.
away
Figure 12. Perfect Temp
9
feels like
indoor indoor
feels like
temperature humidity
+
= 75°
2:31 am
Home
tue | Mar 31, 2015
76
57%
inside
0
auto
modes /schedules
set−to
80
on