Notifications; Advance Settings; General; Display - Lennox iComfort E30 User Manual

NOTIFICATIONS

This section allows the user to set up reminders for various accessories. By default
all listed items are disabled. The reminders can be set for 3, 6, 12 or 24 months and
a custom reminder by specific date can be set.

ADVANCE SETTINGS

This section is for installers and technicians ONLY to customize system settings
and run various diagnostic tests.
• View dealer control center - allows installers and technicians to perform custom
configurations tailored for the homeowners unique requirements.
• Restart - Options are to restart Smart Hub or thermostat or both.
• Pair Smart Hub to iComfort Dealer Mobile Setup App - this allows an installer
to pair their mobile device to start the initial commissioning of the system,
or a technician to use a mobile device to perform custom configurations or
troubleshooting.

GENERAL

This section provides information and setting changes for various displayed items.
This page will provide detailed information concerning the HD Display (thermostat
info) and Smart Hub. Provided are: model number, serial number, hardware,
software and Wi-Fi revisions.
In addition, for thermostat and Smart Hub, a software update option is listed. Select
software update and set Automatic Updates to YES or NO (default is NO). You can
also select check for updates now.
This page will display or allow information to be changed concerning the dealer.
Items included on this page are name, address1, address2, city, state, zip code,
country/region, phone, email and website. There is a dealer access option at the
bottom of the page. Press the > button to access the dealer access page.
1. Remote View: This option allows the dealer access to remotely view your
system. Options are ON and OFF. Default is OFF.
2. Remote Control: There are two options under this section, OFF and ON/
ALWAYS. Selecting the desired option will place a green check mark next to
the feature.
3. Alerts and Notifications: Default is OFF. Turning on this feature will allow
automatic notifications to be sent to your dealer concerning maintenance.
There are three options for screen locking. Default is unlocked.
About
Dealer Info
Dealer Access
Screen Lock
• Unlocked - Changes can be made to any settings.
• Partially Unlocked - Screen is locked but temperature settings can be changed.
• Locked - No changes can be made.
To unlock partially locked or locked, press anywhere on the screen and hold for
five seconds.
The following items can be set on this screen:
1. The clock can be changed to 24 hour (military). Default is OFF.
2. The following settings are only available if the system is not connected to the
Internet.
• Daylight Savings - ON or OFF. Default is ON.
• Time Zone: Options are Pacific, Mountain, Central and Eastern. Default is
Central. Select time zone and press SET.
• Set Time - Local time can be adjusted. Press SET to finish.
• Set Date - Current date can be set. Press SET to finish.
NOTE: If the system is connected to the Internet, only changing to the 24 hour
clock can be selected.
This allows the language used on the screen to be changed. Options are English,
Français and Español. Default is English.

DISPLAY

The following setting options available are:
1. Outdoor Weather - Turn ON to display weather on the HOME screen.
2. Outdoor Temperature Display - Options are:
• Internet (AccuWeather) - Will display weather provided by AccuWeather
for the local area based on the homeowner zip code.
NOTE: Thermostat has to be connected to the Internet, system is registered, and
you are logged into myicomfort.com for this feature to work. See menu >
system settings > account to verify.
Sensor - Display outdoor temperature only from installed remote outdoor
•
sensor connected directly to the E30 Smart Hub.
3. Outdoor Air Quality - Turn ON to display outdoor air quality on the weather
screen.
4. Indoor Humidity - Turn ON to display indoor humidity above the indoor
temperature on the HOME screen.
12
Date & Time
Language