Lennox iComfort E30 User Manual page 5

» Transitioning to next schedule - The system is following an active schedule
and is transitioning to the next temperature setting based on a time indicator.
» Fan is running - Displayed whenever the system is heating or cooling.
» Allergen Defender is working - When Internet weather is enabled and
pollen count is high in the home's location, the fan will run between heating
or cooling systems to help clean the air.
F. Away - When away icon is touched, the system will automatically use energy
saving settings (heat-to 62 and cool-to 85). Temperatures can be adjusted
by pressing on the available temperature setting (i.e., heat-to or cool-to). To
exit away, press the cancel icon. Note that when manually selecting Away
from the home screen, the Smart Away feature (if enabled under settings)
will be temporally disabled until Away is canceled. See page 10 for additional
information.
G. Pressing on the heat-to area will allow the temperature setting to be changed.
H. Pressing on the cool-to area will allow the temperature setting to be changed.
NOTE: If the system is running on a schedule, any adjustment will display schedule
will hold until next period or select duration of hold. Touch hold or duration
to select the desired time. The hold period can be canceled by pressing the
cancel icon on the right side of the Home Screen.
I. Select Mode: Touch modes/schedules to select the system mode of operation,
run a schedule, fan mode operation and turn the system off. To exit this screen,
press the home icon.
"Figure 4. Select Mode" on page 5 shows the various modes of operation that
may be available. To select a mode for the system or a specific zone, press the
desired operation. The gray shaded area indicates the item has been selected.
NOTE: Options are dependent on system configuration. For example, emerg heat
(emergency heat) will be auxiliary heat for heat pump systems only.
cool only
Figure 4. Select Mode
heat only
heat / cool
auto
emerg heat
select mode
schedules
There are three fan modes of operation, which are auto, on and circulate. Pressing
on the fan icon will allow selection of the desired fan mode.
Table 3. Fan Operations
Fan Icon Fan Mode
ON
AUTO
CIRC
When selecting schedules, the available options are Schedule IQ, summer, winter,
spring/fall and save energy. Schedules are all predefined and can be changed or
renamed by selecting edit schedules.
cancel
Figure 5. Set Schedule Time Screen
Schedule IQ - This schedule operates in heat / cool mode and answering a few
simple questions will allow the system to know how to set the temperature for the
home based on time settings.
By default there are two time and temperature settings which can be adjusted
using the edit schedules option.
@ home day - default time is 7:00AM with a low temperature setting of 67°F
(19.5°C) and high temperature setting of 80°F (26.5°C).
5
Fan Operations
Description
Fan is NOT following the schedule and runs continuously
until it is changed from the selected mode.
Fan will follow the fan setting in the selected schedule.
Fan is following schedule and cycles during periods of
equipment inactivity. Circulate run time is dependent on
user settings.
Schedules
set time
5 59
6 00 AM
01 PM
7
done