Settings; Wi-Fi - Lennox iComfort E30 User Manual

@ home night - default time is 11:00PM with a low temperature setting of 66°F and
high temperature setting of 84°F (29°C).
away - Smart Away is used to set the temperature while the home is unoccupied.
Default low temperature setting of 62°F (16.5°C) and high temperature setting of
85°F (29.5°C) .
Temperatures for "home day", "home night" and "away" can be adjusted by sliding
the low and high temperature circle left or right on the slider.
For each time setting, a specific fan operation can be set as well. Options are on,
auto and circulate. Other options are rename the schedule and restore defaults.
Press the home icon to exit the screen.
J. Indicates the actual mode of operation the system is running.
K. This is the "inside" room temperature.
NOTE: If the "feels like" option is enabled, feels like will appear above the
temperature. This feature can be enabled in the user settings.
L. This icon and number represents the humidity level inside the home at the
thermostat location only. This will only be displayed if enabled in the user
settings for display. The rain drop will be displayed as different levels based on
humidity percentage are detected in the home.
M. Items that may appear in this area of the screen are as follows:
Is displayed when a manual temperature override has been set. Press
cancel to return to the current schedule.
Indicates the system is set to "Perfect Temp". Allows the current
temperature to reach desired set point without system operation by
"coasting" to the set cooling set point. Press cancel to return to the
current schedule.
Indicates the system is set to "Perfect Temp". Allows the current
temperature to reach desired set point without system operation by
"coasting" to the set heating set point. Press cancel to return to the
current schedule
N. This area of the screen will display either the outdoor temperature or weather
forecast depending on system settings. The outdoor weather option under
menu > settings > display > outdoor weather has to be ON and outdoor
temperature is set to either Internet (AccuWeather) or sensor.
Press on the weather section of the Home screen to display detail information
concerning local weather. The weather displayed is also dependent on the user
correctly adding the home info. Go to menu > settings > home info and verify
or add the home information. If only the outdoor sensor is to be used, go to
outdoor temperature and set to sensor.
NOTE: If Internet and weather provider are selected, weather information will
only be displayed once the thermostat has been set up, connected to the
Internet and user login to their account.

Settings

The setting screen will allow the homeowner to connect to their home Wi-Fi router
and give their system a name. See list of settings for options.
Figure 6. User Setting Menu

WI-FI

This is for connecting the thermostat to a secure home wireless network.
NOTE: A router with Bonjour capabilities is required for this function. Check
the router functions if Smart Hubs do not connect. Apple Bonjour
implementation of zero-configuration networking (Zeroconf), a group of
technologies that includes service discovery, address assignment, and
host name resolution.
NOTE: Never use a home guest account. Never use an open router connection
(non-secure). Always use a secure connection physically located in the
home where the thermostat is located.
6
settings
settings
wi−fi local
wi−fi local
name smart away upstairs on
away feels like off off
fan Feels Like auto off
heat & cool
fan
auto
humidity heat & cool
humidity iHarmony zoning
notifications
notifications
general
advanced settings
display
general
home info
display
account
home info
account
is an
®