12
SERVICE WORK ON THE CHASSIS
12.19
Mounting the seat
12.20
Removing the air filter box lid
12.21
Installing the air filter box lid
–
Raise the rear of the seat, push the seat back, and lift it off.
H00183-11
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and simultaneously push the seat forward.
The seat is correctly engaged.
H00183-10
–
Mount and tighten the seat fixing screws
Guideline
Remaining screws, chassis
H00182-10
–
Release catch
remove toward the rear.
H00213-10
–
Position the air filter box lid and tab
and
.
–
Engage tab
H00213-10
, pull off the air filter box lid sideways in areas
.
.
M6
10 Nm (7.4 lbf ft)
. Engage the air filter box lid in areas
50
and
and