Removing The Right Side Cover; Installing The Right Side Cover - Husqvarna FE 450 2016 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.32

Removing the right side cover

12.33

Installing the right side cover

(FE US)
–
Remove screws
–
Remove the connecting cap with the perforated pipe, O-ring
fiber yarn filling
–
Remove screws
–
Remove screws
–
Remove the insulating pad from the insert.
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new insulating pad on the insert and fasten with adhesive tape.
–
Position the insert with the insulating pad in outer tube
–
Mount and tighten screws
Guideline
Screws on the main silencer
–
Mount O-ring
–
Mount new glass fiber yarn filling on the perforated pipe.
–
Mount the connecting cap with the glass fiber yarn filling in the outer tube.
M00434-10
–
Mount and tighten screws
Guideline
Screws on the main silencer
–
Mount O-ring
–
Position the silencer cap with O-ring
–
Mount and tighten screws
Guideline
Screws on the main silencer
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove screw
–
Pull off the side cover in area
S00902-10
–
Position the side cover and engage in area
–
Mount and tighten screw
Guideline
Remaining screws, chassis
S00902-10
 of connecting cap

.

and silencer cap
 
and insert

.

on the silencer cap.
Info
Press the glass fiber yarn filling into the outer tube using a blunt tool.

.

on the silencer cap.

.
p. 57)
p. 58)

.

sideways and remove it toward the rear.

.
 .

 
with O-ring .
together with insulating pad

.
M5 7 Nm (5.2 lbf ft)
M5 7 Nm (5.2 lbf ft)

in the outer tube.
M5 7 Nm (5.2 lbf ft)

.
M6 10 Nm (7.4 lbf ft)
58
, and glass

.