String Table - Datalogic PowerScan PM8300 Product Reference Manual

Enter Configuration
1. Read the above code to associate a Function Key or the Shift key (if
2. Specify which Function Key you want to associate (F1 – F4 or Shift F5)
3. Select the label command you want to associate from the table on page

STRING TABLE

The Powerscan™ 16-key model allows you to define a String Table, a data-
base with room for five entries, from String1 to String5, which can be
recalled using a Function Key. This is done with Function Key Programming,
described on page 55.
The string can be a single 'char'. Default = empty strings.
1. Read the above code.
2. Select the string number you want to add by scanning a barcode (1 – 5)
3. Select the desired string length by scanning a barcode (0 – A) from the
4. Define the label string by scanning characters or numerals from the
56
defined as F5).
by scanning a barcode (1-5) from the hex numeric table in the back of
this manual.
55. Scan a barcode from the hex numeric table corresponding to the
command ID (0-A).
from the hex numeric table in the back of this manual.
hex numeric table.
hex numeric table.
Exit and Save Configuration
define function key
define string
PowerScan™ PD9330/PBT9300/PM9300