Datalogic PowerScan PM8300 Product Reference Manual page 10

Compatibility with PM8300
PowerScan™ M8300/STAR-Modem™ in Stand-Alone Mode
To configure a PowerScan™ M8300 reader to communicate with STAR-
Modem™ in Stand-alone Mode, follow the procedure on page 3 substituting
steps 6 and 7 with those below:
6. STAR-Modem™ Address
Read the code above and the four-digit address of the STAR-Modem™.
7. Exit and Save configuration
END of procedure.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see CHANGING DEFAULT SETTINGS on page 14.
6 PowerScan™ PD9330/PBT9300/PM9300