Configuring The Wireless Barricade G Router; Browser Configuration - SMC Networks Barricade SMCWBR14-G User Manual

C
ONFIGURING THE
The Wireless Barricade g Router can be configured by Internet
Explorer 5.5 or above. Using the web management interface, you
can configure the Wireless Barricade and view statistics to
monitor network activity.
Note:
Before you attempt to log into the web-based administration,
please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Wireless Barricade. If you don't have a link
light, then try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
20
B
ARRICADE G
Before you attempt to configure your Wireless
Barricade, if you have access to the Internet please
visit www.smc.com
update to ensure your Wireless Barricade is running
the latest firmware.
W
and download the latest firmware
IRELESS
R
OUTER