SMC Networks SMC7004AWBR User Manual page 42

Configuring the Wireless Barricade
Sets the time zone for the Wireless Barricade. This information is
used for log entries and client access control.
Password Settings
Use this menu to restrict access based on a password. By
default, there is no password. For security reasons you should
assign one before exposing the Wireless Barricade to the
Internet.
Passwords can contain from 3–12 alphanumeric characters and
are not case sensitive.
Note:
Enter a maximum Idle Time Out (in minutes) to define a
maximum period of time for which the login session is maintained
34
If your password is lost, or you cannot gain access to
the user interface, press the Reset button on the front
panel (holding it down for at least five seconds) to
restore the factory defaults. (The default is no
password.)