SMC Networks SMC7004AWBR User Manual page 24

Configuring Client TCP/IP
8. On the Network Properties Window, click the OK button to
save these new settings.
Note:
9. Windows may prompt you to restart the PC. If so, click the Yes
button. If Windows does not prompt you to restart your
computer, do so to insure your settings.
Obtain IP Settings from Your Wireless Barricade
Now that you have configured your computer to connect to your
Wireless Barricade, it needs to obtain new network settings. By
releasing old IP settings and renewing them with settings from
your Wireless Barricade, you will also verify that you have
configured your computer correctly.
1. Click Start/Run.
2. Type WINIPCFG and click
OK.
3. From the drop-down menu,
select your network card.
Click Release and then
Renew. Verify that your IP
address is now
192.168.2.xxx, your Subnet
Mask is 255.255.255.0 and
your Default Gateway is
16
Windows may ask you for the original Windows
installation disk or additional files. Check for the files at
c:\windows\options\cabs, or insert your Windows
CD-ROM into your CDROM drive and check the correct
file location, e.g., D:\win98, D:\win9x. (if D is the letter
of your CD-ROM drive).