Connect The System; Basic Installation Procedure - SMC Networks SMC7004AWBR User Manual

•
For wired LAN connection, you need a computer equipped
with a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet
card,or a USB-to-Ethernet converter. For wireless LAN
connections, each computer must have an IEEE 802.11b
compatible wireless adapter.
•
TCP/IP network protocols installed on each PC that needs to
access the Internet.
•
A Java-enabled Web browser, such as Microsoft Internet
Explorer 5.0 or above, or Netscape Communicator 4.0 or
above installed on one PC at your site for configuring the
Wireless Barricade.

Connect the System

The Wireless Barricade can be positioned at any convenient
location in your office or home. No special wiring or cooling
requirements are needed. You should, however comply with the
following guidelines:
•
Keep the Wireless Barricade away from any heating devices.
•
Do not place the Wireless Barricade in a dusty or wet
environment.
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when you
install the Wireless Barricade.

Basic Installation Procedure

1. Connect the LAN: You can connect the Wireless Barricade to
your PC, or to a hub or switch. Run Ethernet cable from one
of the LAN ports of the Wireless Barricade to your computer's
network adapter or to another network device.
Connect the System
9