Using Multiple Guns With Same Cradle - Datalogic DRAGON M SERIES Quick Reference

UK/US
Firmly insert the gun into the OM-DRAGON™ within 10 seconds; a beep
8.
will be emitted, signaling that the OM-DRAGON™ has been paired to the
DRAGON™ M, and the green LED on the reader will go off.
YOUR READER IS NOW CONFIGURED TO READ BARCODES USING THE
DEFAULT VALUES.
Configure the OM-DRAGON™ base, refer to the "OM-DRAGON™
9.
Quick Reference".

USING MULTIPLE GUNS WITH SAME CRADLE

If you want to use several DRAGON™ M guns with the same OM-DRAGON™
cradle, you must first Bind the cradle with one of the guns (see the previous
"DRAGON™ M/OM-DRAGON™ Stand Alone Setup" procedure).
Successive guns can be associated with this same cradle by following the
configuration procedure substituting the Bind command with Join (step 7).
7.
The green LED on the DRAGON™ M will blink: the gun is ready to be
inserted into the cradle. Complete step 8.
END of procedure.
WARNING
8
If the cradle is not bound to a gun, its address assumes a
random value which can cause conflicts and malfunctions
to other cradles within its range.
Join
DATALOGIC