Technical Data; C-Bind System - Opus Atlas 190 User Manual

1. Using the channel width selecting tool (6), measure the thickness of the documents
without the cover or choose the appropriate cover from the chart below.
Measure the thickness of the sheets to be bound,
without covers. Select appropriate cover using the
chart above. Then use the same binding procedure
2. Documents to bind must have a minimum thickness of 1.8 mm, thinner must be bound
using a filler strip called O.Filling Sticky from OPUS, these increase the thickness
for binding. Before binding C-BIND covers remove the Metalbind binding bar (8) with
ruler and insert the O.CB Insert for Atlas 190 binding bar, see (dig.1).
3. To de-bind C-BIND cover use O.CB de-binding wedge for Atlas 190 (Dig.2).
Important! The AA cover de-binding jig tool included in the (O.CB Debinding Tool for
Atlas 190) should be fitted on the spine edge of AA cover before debinding.
4. Follow the same binding and de-binding methods as in Metalbind, chapters 5 and 6.
While binding or de-binding with C-Bind System, front or back of cover may face you.
8

TECHNICAL DATA

• Binds and de-binds up to 190 sheets* = 380 pages **
• Dimensions: H-180 x W-435 x D-320 mm
• Net weight: 16.1 kg
• Gross weight: 18.5 kg
* Tested on 80 g/m paper
2
** Printed each side
Atlas 190 • User's guide
Sheet binding chart for the C-Bind system.
as Metalbind (see chapter 5).
Channel size
AA
A
B
C
D
Inumber of sheet
soft cover 15-40
hard cover 20-40
41-90
91-120
121-145
146-185
GB