Technical Data - Opus Atlas 190 User Manual

dig. 1
dig. 1
dig. 1
1. Using the channel width selecting tool (7), measure the thickness of the documents
without the cover or choose the appropriate cover from the chart below.
Channel size Number of sheets
AA 5 mm
A 10 mm
B 13 mm
C 16 mm
D 20 mm
3. To de-bind C-BIND cover use O.CB de-binding wedge for the Atlas 190 (Dig.2).
Note! The AA cover de-binding jig tool included in the (O.CB Debinding Tool for
Atlas 190) should be fitted on the spine edge of AA cover before debinding.
4. Follow the same binding and de-binding methods as in Metalbind, chapters 5 and 6.
While binding or de-binding with the C-Bind System, front or back of cover may face
you.

TECHNICAL DATA

9
• Binds and de-binds up to 190 sheets* = 380 pages **
• Dimensions:...............................................................H-180 x W-435 x D-320 mm
• Net weight:............................................................................................16.1 kg
• Gross weight: :....................................................................................... 18.5 kg
* Tested on 80 g/m paper
2
01.03.2021 OPUS Sp. z o.o. ● ul. Toruńska 8 ● 44 – 122 Gliwice ● Poland ● www.opus.pl
Atlas 190 • User guide
dig. 2
Sheet binding chart for the C-Bind system.
Measure the thickness of the sheets to be bound,
without covers. Select appropriate cover using the
chart below. Then use the same binding procedure
as Metalbind (see chapter 5).
7
2. Documents for bind must have a minimum
15 - 40
thickness of 1.8 mm, thinner must be bound using
41 - 90
a filler strip called O.Filling Sticky from OPUS, these
91 - 120
increase the thickness for binding. Before binding
121 - 145
C-BIND covers remove the COVER guide (8) with ruler
and insert the O.CB Pivot Inserts for Atlas 190
146 - 185
binding bar, see (dig.1).
** Printed each side
dig. 2
dig. 3
7
EN
dig. 3