Preparation To Work; Binding With Metalbind - Opus Atlas 190 User Manual

other than those indicated in the operating/user manual
• It is necessary to check and supervise if the equipment is being used and operated
correctly, before reporting any malfunctions or problems to the service department
or dealer
• Equipment must not be located outside or operated in temperatures under 8˚C / 46.4˚F
and must be operated in accordance with the general Health & Safety rules
failure to do so could cancel the guarantee
• Repairs must be carried out by authorized staff, during the guarantee period, failure to
do so could cancel the guarantee
4

PREPARATION TO WORK

After taking the device out of the packing box, start assembling the equipment, attach the
extended back support (11) on to the lower back support, to the pre drilled holes with the
Allen key and screws supplied, now fit the bind & de-binding handle (1) with the bolt and
Allen key supplied, in the hole in the side and tightened firmly.
Now place the two plastic bars called (COVER GUIDE SYSTEM) (7 & 8) in the binding slot
(8) with the ruler at the back of the slot, and the second bar (7) with magnets at the front
(see diagram on the opposite page)
The cover guide system has been specially designed to help you insert the covers and
documents into the channel easily and centre covers and documents when using smaller
channels.
It is very important that the cover guide system is fitted correctly in the binding slot (3)
the sloped edges of the bars should be facing each other in the binding slot please check by
looking at the diagram. (see diagram on the opposite page).
The equipment is now ready for work.

BINDING WITH METALBIND

5
1. Use channel width selecting tool (6) or table below to
choose size of channel.
Size of channel
5
7
10
13
16
20
H = hard cover. p = pages. T = transparent cover. S = soft cover. O = no cover.
Example: H/p/H =(H) hard cover/ (p)pages / (H) hard cover
H/p/H
10 - 31 10 - 33
32 - 60 34 - 63
61 - 89 64 - 92
90 - 118 93 - 121
119 - 148 122 - 150
149-186 151 - 189
H/p/T S/p/S
10 - 34
35 - 63
64 - 92
93 - 121
122 -150
151 - 190
O/p/O
10 - 38
39 - 67
68 - 97
98 - 126
127 - 155
156 - 190