Sanofi-aventis BG-STAR Owner's Manual page 7

[9] Apply only fresh capillary blood or control solution to the
sample area of the BGStar Test Strip.
About the BGStar Meter
(1) Display: Glucose test results, symbols,
messages, and graphs appear here.
(2) CHECK ( ) Button: Use the CHECK
button to confirm an option or make a
selection in a menu.
(3) UP Arrow ( ) Button: Use the UP
arrow button to scroll backward through
options.
(4) DOWN Arrow ( ) Button: Use the
DOWN arrow button to scroll forward
through options.
(5) BACKLIGHT ( ) Button: Use the BACKLIGHT button to
turn the backlight ON and OFF.
(6) Test Strip Port: Insert the BGStar Test Strip, with the
contact bars facing up, into the test strip port.
10
1
3
5
2
4
6
About the BGStar Meter Display Symbols/Messages
(1) Date and Time:
Appears here, including
when the meter is
deactivated.
(2) Glucose Test Results
(3) Low Battery Message:
Appears when battery #2 in
your meter is running low.
(4) Dead Battery Message: Appears when
battery #2 in your meter is dead.
(5) Temperature Symbol: Appears when the
meter is outside its operating temperature range
of 10°C to 40°C.
(6) Ketone Symbol: Appears when your glucose test
results are higher than 13.3 mmol/L.
(7) Control Solution message: Appears after
you have performed a control solution test.
(8) Units of Measurement symbol: Results
will be displayed in mmol/L.
(9) Apply Sample to Test Strip message: The
flashing droplet symbol and the word "fill" will signal
you to apply a sample to the test strip.
11